STANDARD HELICAL DRIVE HEADS

PierTech Europe’s Standard Helical Drive Heads were designed specifically for helical piers or piles installation. Designed by real-world engineers who understand the demands of the foundation industry, these drive heads are designed to perform under the most strenuous environments. Their design also allows them to run at the highest efficiency rates so that they will perform dependably for years.

5K – 7K

9K – 12K

13K – 16K

20K – 30K

Description 5ADS 6ADS 7ADS 7ALS
NOMINAL TORQUE (Nm) 6100 7730 9760 9760
RECOMMENDED FLOW (GPM) 20-36 20-36 20-36 20-36
MAX PRESSURE – DO NOT EXCEED 3500PSI @ 26 GPM 3500PSI @ 26 GPM 3500PSI @ 26 GPM 3000 PSI
MAX FLOW – DO NOT EXCEED 60GPM @1600 PSI 60GPM @1600 PSI 60GPM @1600 PSI 3000 PSI
MAX HORSE POWER 55 55 55 55
PRESSURE RELIEF VALVE INCLUDED INCLUDED INCLUDED INCLUDED
ENERGY CONTROL VALVE INCLUDED INCLUDED INCLUDED INCLUDED
STANDARD OUTPUT SHAFT 64mm HEX 64mm HEX 64mm HEX 64mm HEX
WEIGHT (KG) 130.5kg 130.5kg 130.5kg 130.5kg
OVERALL LENGTH (M) 0.86m 0.86m 0.86m 0.86m
DIAMETER (MM) 290mm 290mm 290mm 290mm

Contact us to talk to a helical pier equipment expert.